PL-DR04BT is based on the IEEE802.3BT standard, which realizes automatic control and individual control of the brightness and color of the lighting system, and the power supply range is 52V-57V.
Product Information :
PL-DR08BTProduct Origin :
ChinaColor :
SilverProduct Introduction
PL-DR08BT is an eight-way output control, intelligent LED driver based on IEEE802.3BT standard PoE power supply.
PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
The PL-DR08BT driver is suitable for indoor LED lighting and is connected to the Internet and powered by a Class 5 network cable and a PoE switch that complies with the IEEE802.3BT standard. PL-DR08BT eight-way output can power eight LED lamps, the power of a single lamp does not exceed 60W, the total power generally does not exceed 90W, through the setting or system configuration can be controlled individually each lamp.
PoE-LED driver is a constant current power supply, power supply range 52V-57V. It is recommended to choose a suitable lamp, the power supply efficiency of the driver is better.
PL-DR08BT power supply input and output are not more than 57VDC safe voltage range, easy installation and construction, eight power supply and one sensor integrated design, reduce the construction cost. The products are widely used in the field of office and building lighting.
LED Driver technical parameter tabl
|
|||
Model |
PL-DR08BT
|
Data Speed | 10/100Mbps |
Input |
44-57V dc 1.7A
|
||
Protocol |
IEEE802.3 bt Class 8
|
||
Power Pins | 4、5 ( + ) 7、8 ( - ) & 3、6 ( + ) 1、2 ( - ) | ||
Output voltage |
5-55V dc
|
Output current |
650mA single channel
|
Output port
|
5.5*2.5mm female plug *8+ RS485 *1
|
||
Communication | MQTT | ||
Frequency
|
20KHz
|
||
Duty cycle
|
10%-100%
|
||
Dimming
|
Microwave / brightness / manual
|
||
Management | Remote management available | ||
Safety |
Overvoltage/overcurrent protection
|
||
Color temp
|
Natural light / cool white / warm white |
Brightness range
|
Monochrome(1000-8191)
|
Lamp
|
Energy-saving lamps / light strips / light bars / ceiling lamps / pendant lamps / floor lamps, etc
|
||
Operating temp
|
-20℃ to 60℃
|
Operating humidity
|
20% to 80%, non-condensing
|
Storage temp
|
-40℃ to 150℃
|
Storage humidity
|
10% to 90%, non-condensing
|
Material | Metal | Color |
Silver
|
Indicator light | Green:PoE Yellow:Data | ||
Mounting | Wall-mounted | IP Rated | IP40 |
1.Connecting a PoE Switch
PoE In input port Connects to a PoE switch that complies with the IEEE802.3BT standard through a Cat5e network cable.
|
2.Connected LED light
LED1 and LED2 output ports connect LED lights that meet voltage and current requirements and support various types of lights.lamps, etc.
|
Diagram of connecting switch
|
Schematic diagram of connecting LED lights
|
3.Connecting sensor
Intelligent control LED light switch status and brightness.
|
|
Sensor connection diagram
|
|