PL-POS16B-2U-M is an intelligent LED Switch with sixteen PoE output power supplies based on the IEEE802.3BT standard.
Product Information :
PL-POS16B-2U-MProduct Origin :
ChinaColor :
BlackProduct Introduction
The 16-port PoE LED switch is powered by a PoE network. Sensors and algorithms are used to automatically control the brightness, color and other parameters of the lighting system. It can improve lighting efficiency and comfort, reduce energy consumption and environmental impact, and improve system stability.
The PoE-LED switch is powered by Ethernet to achieve the effect of low-voltage power supply for LED lights. It is safe and convenient for users to install and use LED lights by themselves. Remote intelligent control, while supporting sensor sensing to control lights, energy saving and environmental protection, high cost performance, and wide application range. Using MQTT communication, stable and reliable, easy to manage and update.
Advantages of 16 Port PoE LED Switch
1.PoE-LED 16-port switch, AC input 90-260V, 16-channel output power up to 480W;
2. It can power 16 drivers, or connect 15 drivers and 1 switch;
3. It is mainly used for indoor LED lighting. It can be matched according to actual needs to meet different usage scenarios. It can be widely used in office and building lighting fields;
4. Simple plug-and-play setup, no need to install or configure software;
5. Support desktop or wall-mounted placement;
6. Comply with IEEE802.3bt standard, silent operation, very suitable for noise sensitive environment;
| LED Switch technical parameter table | |||
| Model | PL-POS16B-2U-M | Data Speed | 10/100/1000Mbps |
| Input | 90-260V ac 7.2A 50/60Hz | ||
| Protocol | IEEE802.3 bt Class 8 | ||
| Power Pins | 4、5 ( + ) 7、8 ( - ) & 3、6 ( + ) 1、2 ( - ) | ||
| Output voltage | 44-57V dc single channel | Output current | 1700mA single channel |
| Output power | 480W Max | ||
| Communication | MQTT | ||
| Port | 16*PoE +2*LAN+2*SFP | ||
| PoE Control | Automatic/Manual/Force | ||
| Switching mode | Wired/wireless switch | ||
| Management | Remote management available | ||
| Safety | Overvoltage/overcurrent protection | ||
| Speed | PoE：10/100/1000Mbps | ||
| LAN：10/100/1000Mbps SFP：1G | |||
| Operating temp | -20℃ to 60℃ | Operating humidity | 20% to 80%, non-condensing |
| Storage temp | -40℃ to 150℃ | Storage humidity | 10% to 90%, non-condensing |
| Material | Metal | Color | Black |
| Indicator light | Green：PoE Yellow：Data | ||
| Mounting | Wall-mounted | IP Rated | IP40 |
| Size | 360 X 140 X 91mm | ||
|
1.Connect the power supply Connect the power supply to the PoE Switch. After inserting the AC cable, secure it using a buckle to prevent power failure. |
2.Connection network Use a network cable to connect the Uplink port of the PoE Switch, or use 1 Gbit/s optical fiber to connect the SFP port. |
|
Power supply connection diagram |
Connection network diagram |
|
3.Connection drive Connect the Switch to the driver for data and power transmission. |
4.Connection switch Connect the PoE port on the Switch to the switch for data transmission and control the switch of the indicator. |
|
Connection driver diagram |
Connection switch diagram
|
PL-DR02BT is a two-channel output control, based on IEEEE802.3BT standard PoE power supply intelligent LED driver.
PL-DR02AT is a two-channel output control, based on IEEE802.3AT standard PoE power intelligent LED driver.
PL-SER-1M is a PoE LED Server, which can control the driver of the LED light through the PoE Switch, and the LED driver is powered by PoE. It can be connected to the Internet through the cloud server, and PoE LED lights can be controlled from anywhere at any time.
PL-SW01 is a one-way wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW02 is a 2 way wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW03 is a wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW04 is a wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-POS8B-2U-M is a smart LED switch equipped with 8-way PoE output power supply, which improves lighting efficiency and comfort, reduces energy consumption and environmental impact, and improves system stability.
PL-POS16B-2U-M is an intelligent LED Switch with sixteen PoE output power supplies based on the IEEE802.3BT standard.
PL-POS8B-2U is an 8 Port PoE Switch ,8 Port PoE output power supplies based on the IEEE802.3BT standard. Supports WEB management, provides a simple and easy-to-use operation interface, with simple functional configuration, and allows for intuitive viewing of device operation status information.
Easy setup with no software installation or configuration needed,support power detection function, automatically detect devices, will not burned non-stantard PoE device or standard PoE switch.
The PL-IND-1 series is an PoE LED intelligent lighting sensor based on CDM324 and BH1750.
PL-DR04BT is based on the IEEE802.3BT standard. It uses sensors and algorithms to automatically control the brightness and color of the lighting system. It can supply power to 4 LED lights and control each light individually.
PL-DR04BT is based on the IEEE802.3BT standard, which realizes automatic control and individual control of the brightness and color of the lighting system, and the power supply range is 52V-57V.
PL-DR01AT is a single output control, based on IEEE802.3AT standard PoE power intelligent LED driver. PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
PL-DR02BT is a two-channel output control, based on IEEEE802.3BT standard PoE power supply intelligent LED driver. PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
Room 1504, Building 16, No. 7 Keji 10th Road, Songshan Lake Park, Dongguan City, Guangdong Province
IPv6 network supported
